:fill(transparent))
White Knight Ultra Pave Clear Sealer
White Knight Ultra Pave Clear Sealer with DuraTough® technology is a hard wearing acrylic designed to protect and enhance decorative concrete surfaces. It delivers a durable, non yellowing wet look finish that brings out the natural colour and texture while providing long term protection.
Features
- DuraTough® acrylic formulation with a hard-wearing, non-yellowing finish
- Wet look finish seals and protects stamped & stencilled concrete and pebblecrete
- Resists dirt, grease, oil and everyday stains
- Helps prevent mould and mildew growth outdoors
- Strengthens and seals decorative concrete against erosion and dusting
How to Apply
- For best results, use the recommended White Knight products and follow the step-by-step guide below.
Ensure all new concrete is fully cured for a minimum of 28 days before application. Repair any cracks or damaged areas using a suitable exterior cement filler.
Remove all loose and flaking material, and thoroughly clean the surface so it is dry and free from dust, dirt, grease, oil, mould and other contaminants.
For smooth concrete, etch the surface using White Knight Ultra Pave Concrete Etcher to promote adhesion.
Allow new or freshly cleaned concrete to dry for at least 5 days in fine weather before coating. Remove mould, fungus or moss using household bleach or a high-pressure cleaner.
Stir thoroughly using a broad, flat stirrer in a circular lifting motion before and during use.
Apply 2 coats using a brush or roller. Thin the first coat with 20–30% White Knight Rust Guard Solvent, then apply the second coat unthinned.
Do not apply in temperatures below 10°C or above 30°C, or in poor drying conditions such as high humidity or low ventilation.
Touch dry in approximately 1 hour.
Allow 2 hours between coats.
For driveways and garage floors, allow 24–72 hours before vehicle traffic.
Drying times may be extended in cold, humid or low ventilation conditions.
