:fill(transparent))
White Knight Hi Temp Pot Belly Paint
Formulated to resist blistering and peeling, this self priming coating can be applied directly to properly prepared metal without the need for an undercoat. Ideal for pot belly stoves, heaters, ovens, flues and BBQ surrounds, it provides reliable performance under heat.
Features
- Heat resistant to 300°C for radiant-heat metal surfaces
- Durable low sheen finish that matches many stoves & BBQs
- Self-priming formula — no undercoat required
- Excellent coverage with multi-directional nosel
How to Apply
Ensure surface is clean, dry and free from grease, oil, rust and contaminants
Remove loose rust, scale or old paint using a wire brush or sandpaper
Lightly sand previously painted or glossy surfaces
Clean with mineral turpentine and allow to dry
Shake can for at least 1 minute after the mixing ball starts rattling
Continue to shake regularly during use
For tins, mix paint thoroughly using a stirrer
Hold can approximately 15–20cm from the surface
Apply light, even coats using smooth sweeping motions
Apply a light mist coat followed by a full coat
Avoid heavy application to prevent runs or uneven curing
Do not apply below 15°C or above 30°C or in high humidity
For tins, use a paint brush and apply evenly
Covers up to 1.5m² per can, depending on surface and application
Touch dry: ~1 hour
Recoat: after 16 hours
Full hardness achieved after heat curing once dry
