White Knight Rust Guard® Epoxy Enamel

310g, 250ml, 500ml, 1L, 4L

UV resistant protective finish



Features

• 5 year guarantee ^

• Protects new metal

• Easy 1 step application – no primer required for new or lightly rusted structural steel

• Excellent durability, adhesion and abrasion resistance

• Tintable to 1000's of

• Interior and exterior use

• Safe to spray - CFC and lead free

^ Please refer to the warranties and disclaimers section

White Knight Rust Guard® Epoxy Enamel may be used on all metal surfaces. Ideal for use on metal fences, roofs, doors, gutters, downpipes, windows, railings and gates.

1. PREPARATION

AEROSOL:

  • Remove all rust and loose and flaking paint.
  • Sand new metal, previously painted or glossy surfaces thoroughly.
  • The surface must be clean, dry and free from dust, dirt, grease, oil, rust scale and other contaminants.
  • Convert rusted steel and wrought iron surfaces with White Knight Rust Guard® Rust Converter.
  • Prime rusted steel and wrought iron with White Knight Rust Guard® Metal Primer.
  • Prime galvanised iron, ZINCALUME®* and non ferrous metals e.g. aluminium with White Knight Rust Guard® True Bite or SLS Etch Primer.
  • In highly corrosive conditions such as coastal areas prime steel and wrought iron with White Knight Rust Guard® Metal Primer.
  • Cover surrounding areas to protect from overspray.

BRUSH ON:

  • Remove all rust and flaking paint.
  • Sand new metal, previously painted or glossy surfaces thoroughly.
  • Convert rusted surfaces with White Knight Rust Guard® Rust Converter.
  • The surface must be clean, dry and free from dust, dirt, grease, oil, rust scale and other contaminants.
  • Prime galvanised iron, ZINCALUME® and non-ferrous metals e.g. aluminium with White Knight Rust Guard® True Bite or SLS Etch Primer.
  • In severe conditions, or for added protection to steel and wrought iron, prime with White Knight Rust Guard® Metal Primer.

2. APPLICATION

AEROSOL:

  • Shake can vigorously for 2 minutes before use and regularly during use.
  • Adjust nozzle to desired spray pattern. Use the horizontal setting when spraying up and down and the vertical setting when spraying across.
  • Hold the can upright approximately 15-20 cm from the surface.
  • Press button firmly and spray with a smooth sweeping motion. Apply a pre-wetting mist coat followed by a full even coat, overlapping each spray pass. To prevent paint sagging, avoid spraying too close to the surface or spraying too heavily.
  • Repeat if necessary.

Do not use when air or surface temperature is below 15°C or above 30°C

BRUSH ON:

  • Stir thoroughly with a broad flat stirrer in a circular lifting motion for at least 5 minutes before use and continue to stir at regular intervals during application.
  • No thinning is required for application by brush or roller. If spraying you may thin up to 10% with White Knight Rust Guard® Solvent.
  • Apply 2 coats by brush, roller or spray gun. For best results lightly sand between coats.

Do not use when air or surface temperature is below 10°C or above 30°C

*ZINCALUME® is a registered trademark of Bluescope Steel Limited. 

 

 


Colour Range

Rust Guard® products include popular pre-tinted colours as well as bases that maybe tinted to 1000s of Taubmans® colours.

For more colour options visit the Taubmans® website. Click here

Colours
Flat White
Satin White
Gloss White
Thin Ice
Platonic
Grey Ghost
Vintage Lace
Colorbond Paperbark
Clear Atrium
Colorbond Evening Haze
Smokey Mood
Icy Bay (1)
Colorbond Surfmist
Secret Passage
Riley Ash
Silver Dollar
Almond Friand
Mighty Mink
Colorbond Wilderness
Red Licorice
Crystal Crush
Cold Steel
Colorbond Shale Grey
Old China
Pebble Grey
Colorbond Dune
Classic Cream
Colorbond Gully
Stonewash
Teal Blue
Colorbond Cove
Flame Red
Thunder Storm
Platinum Grey
Thundercloud
Shindig
Grey Bonnet
Cookie Jar
Colorbond Sandbank
Colorbond Jasper
Marine Blue
Rainforest
Colorbond Bushland
Terracotta
Charcoal Smoke
Colorbond Windspray
Colorbond Basalt
Colorbond Ironstone
Spicy Pepper
Colorbond Terrain
Elegant evening
Colorbond Cottage Green
Colorbond Pale Eucalypt
Colorbond Manor Red
Colorbond Woodland Grey
Machinery Grey
Colorbond Wallaby
Rain Barrel
Colorbond Deep Ocean
Brunswick Green
Colorbond Mangrove
Indian Red
Flat Black
Satin Black
Gloss Black
Colorbond Night Sky
Colorbond Monument
Buffalo Brown
Aluminium
Blue
Silver
Charcoal
Gunmetal
*Due to colour variations in all browser types, the displayed colour palettes are a representation only of the actual colour. This should not be used in deciding the colour range suitable for you application.

Need Help?

It’s as easy as selecting a project type and the material involved